L i g h t
s c e n e
�
O p e r a t e
�
①
②
③
④
Pressing ② or ③ brings up the
Operate lighting scene
menu item.
S e l e c t
s c e n e
E s c
-
0 7
+
O K
①
②
③
④
Press ② or ③ to select the required lighting scene and press ④ to con-
firm. Only lighting scenes that actually exist are displayed.
Example:
select lighting scene 07 -> OK
Note:
even a disabled lighting scene can be saved.
S c e n e :
0 7
E s c
o n
s a v e
①
②
③
④
Lighting scene 07 is selected. Pressing ① takes you back to the
Select
scene
menu, pressing ② calls up the lighting scene that consists of previ-
ously defined groups. Pressing ③ saves the current brightness values of
the associated groups as a lighting scene – in memory location 07 in this
case�
5.5
Logging devices in and out
To ensure that the gateway can communicate with connected DALI
control gear and electronic ballasts, a one-off teach-in process must
be performed. Each device is given a (short) address ranging from 1
to 64. This address is assigned randomly and cannot be altered. If you
want to organise lighting groups at a later time, you can note down
the addresses of the devices here or at any time when groups are
16
Doepke
