F
WarNiNg:
incorrect installation can damage the gateway and
other system components and result in fires and other
hazards.
»
Note the wiring diagram.
»
Applying mains voltage to the inputs or to the DALI
bus will immediately damage the DALI gateway.
»
Do not use a shared cable for switch and power lines!
Ensure adequate insulation where DALI circuits and
power lines are laid together.
»
External DALI voltage sources must not be
connected�
»
Only connect DALI devices to the DALI interface.
»
The USB port is intended solely for updating the sys-
tem firmware. Do not connect anything to it unless
you have been explicitly instructed to do so by the
manufacturer.
»
Do not connect any other control units (master
devices).
»
Note the maximum cable lengths and cross-sections.
»
Do not exceed the maximum number of components
that can be connected.
DE EN
5
