Dodge Grand Caravan 2014 Owner'S Manual Download Page 586

Page: 586 / 682

3. If using another vehicle to jump-start the battery, park

the vehicle within the jumper cables reach, set the
parking brake and make sure the ignition is OFF.

WARNING!

Do not allow vehicles to touch each other as this
could establish a ground connection and personal
injury could result.

Jump-Starting Procedure

WARNING!

Failure to follow this procedure could result in per-
sonal injury or property damage due to battery ex-
plosion.

CAUTION!

Failure to follow these procedures could result in
damage to the charging system of the booster vehicle
or the discharged vehicle.

Connecting The Jumper Cables

1. Connect the positive

(+)

end of the jumper cable to the

positive

(+)

post of the discharged vehicle.

2. Connect the opposite end of the positive

(+)

jumper

cable to the positive

(+)

post of the booster battery.

3. Connect the negative end

(-)

of the jumper cable to the

negative

(-)

post of the booster battery.

4. Connect the opposite end of the negative

(-)

jumper

cable to a good engine ground (exposed metal part of
the discharged vehicle’s engine) away from the battery
and the fuel injection system.

584

WHAT TO DO IN EMERGENCIES

Summary of Contents for Grand Caravan 2014











































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Grand Caravan 2014

Reviews:

Related manuals for Grand Caravan 2014

Brands by name

Popular brands

Dodge Grand Caravan 2014, Owner'S Manual

Search results

Summary of Contents for Grand Caravan 2014

Reviews:

Related manuals for Grand Caravan 2014

Brands by name

Popular brands