Dodge Grand Caravan 2014 Owner'S Manual Download Page 101

Page: 101 / 682

Can two child restraints be attached using

a common lower LATCH anchorage?

Never “share” a LATCH anchorage with

two or more child restraints. If the center

position does not have dedicated LATCH

lower anchorages, use the seat belt to in-

stall a child seat in the center position next

to a child seat using the LATCH anchor-

ages in an outboard position.

Can the rear-facing child restraint touch

the back of the front passenger seat?

Yes

The child seat may touch the back of the

front passenger seat if the child restraint

manufacturer also allows contact. See your

child restraint owner’s manual for more

information.

Can the head restraints be removed?

Yes; second row

outboard positions

only, third row all

positions.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for Grand Caravan 2014











































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Grand Caravan 2014

Reviews:

Related manuals for Grand Caravan 2014

Brands by name

Popular brands

Dodge Grand Caravan 2014, Owner'S Manual

Search results

Summary of Contents for Grand Caravan 2014

Reviews:

Related manuals for Grand Caravan 2014

Brands by name

Popular brands