Dodge 2013 VIPER SRT Owner'S Manual Download Page 244

Page: 244 / 302

Front Fog Light

1. Remove the push pin from the upper outer corner of
the splash shield and remove the splash shield.

2. Turn the bulb and socket assembly counter-clockwise,
and then pull it out of the front fog light assembly.

3. Pull the bulb out of the socket assembly.

4. Push the replacement bulb into the socket assembly.

5. Reinstall the bulb and socket assembly into the front
fog light assembly, and then turn it clockwise.

6. Install the splash shield and push pin.

244

MAINTAINING YOUR VEHICLE

Summary of Contents for 2013 VIPER SRT















































































































































































































































































































Search results

Summary of Contents for 2013 VIPER SRT

Reviews:

Related manuals for 2013 VIPER SRT

Brands by name

Popular brands

Dodge 2013 VIPER SRT, Owner'S Manual

Search results

Summary of Contents for 2013 VIPER SRT

Reviews:

Related manuals for 2013 VIPER SRT

Brands by name

Popular brands