Dodge 2013 VIPER SRT Owner'S Manual Download Page 36 | Manualshive

Page: 36 / 302

background image

Enhanced Seat Belt Reminder System (BeltAlert

T

)

If the driver does not buckle their seat belt and vehicle
speed exceeds 5 mph (8 km/h), or if the passenger does
not buckle their seat belt within 10 seconds of vehicle
speed exceeding 5 mph (8 km/h), the Enhanced Warning
System (Belt Alert) will alert the occupant(s) to buckle
their seat belt(s). Once triggered, the Enhanced Warning
System (Belt Alert) will flash the Seat Belt Reminder light
and chime for up to 96 seconds to alert the occupant(s) to
buckle their seat belt(s). If the driver unbuckles their seat
belt while vehicle speed is greater than 5 mph (8 km/h),
or if the passenger unbuckles their seat belt for more than
10 seconds while vehicle speed is greater than 5 mph (8
km/h), the Enhanced Warning System (Belt Alert) will
reactivate.

BeltAlert

t

Programming

The Enhanced Warning System (BeltAlert

t

) can be en-

abled or disabled by your authorized dealer or by
performing the following steps:

NOTE:

DaimlerChrysler does not recommend deacti-

vating the Enhanced Warning System (BeltAlert

t

).

1. Close all doors.

2. Turn the ignition switch to the OFF/LOCK position.

3. Buckle the driver’s seat belt.

4. Turn the ignition switch to the ON/RUN position, but
do not start the engine. Wait for the Seat Belt Reminder
light to turn off and then proceed to the next step.

NOTE:

You must perform the following steps within 60

seconds of turning the ignition switch to the ON/RUN
position.

5. Within 60 seconds of turning the ignition switch to the
ON/RUN position, unbuckle and then re-buckle the
driver’s seat belt at least three times within 10 seconds,
ending with the seat belt buckled.

36

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
34
35
36
37
38
...
»

Summary of Contents for 2013 VIPER SRT















































































































































































































































































































Reviews:

No comments

Related manuals for 2013 VIPER SRT

Brand: Harbor Freight Tools Pages: 4

Brand: Xblitz Pages: 16

X-ACT CONTOUR 53491

Brand: HUSKY LINERS Pages: 2

Brand: Volvo Pages: 19

Brand: Sirius Satellite Radio Pages: 8

Brand: Edelbrock Pages: 1

Brand: FORM FIT Pages: 2

Brand: Caltrend Pages: 2

Brand: Advanced ICE Pages: 4

Brand: Hank Pages: 2

TRI-FOLD PG9300RF

Brand: Pet Gear Pages: 4

Brand: Kargo Master Pages: 19

PRIME DESIGN VBR3-FT31B

Brand: Safe Fleet Pages: 12

Brand: Audi Pages: 63

Brand: Saab Pages: 37

Brand: Car-Interface Pages: 23

Brand: Whispbar Pages: 14

Brand: Volvo Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands