Dodge 2013 VIPER SRT, Owner'S Manual

Page: 88 / 302

the Windshield Wiper/Washer Control Lever upward to
the first detent “DEL” position, and then rotate the end of
the lever to select the desired delay interval. There are
seven delay settings, which allow you to regulate the
wipe interval from a minimum of one cycle every second
to a maximum of approximately 15 seconds between
cycles. Rotating the lever upward decreases the delay
time.
WARNING!
Sudden loss of visibility through the windshield
could lead to an accident. You might not see other
vehicles or other obstacles. To avoid sudden icing of
the windshield during freezing weather, warm the
windshield with defroster before and during wind-
shield washer use.
Mist Feature
From the “OFF” position, push the Windshield Wiper/
Washer Control Lever downward to activate a single
wipe cycle to clear the windshield of road mist or spray
from a passing vehicle. The wipers will continue to
operate until you release the lever.
Windshield Washers
To use the washer, pull the Windshield Wiper/Washer
Control Lever toward you and hold it for as long washer
spray is desired.
If you activate the washer while the windshield wiper is
in the delay range, the wipers will operate in low speed
for two wipe cycles after releasing the lever and then
resume the intermittent interval previously selected.
If you activate the washer while the windshield wiper is
turned OFF, the wipers will operate for two wipe cycles
and then turn OFF.
88 UNDERSTANDING THE FEATURES OF YOUR VEHICLE