Mode Control
Use this control to select the direction
of air flow.
NOTE:
The dot between the mode control icons is a mix
position between the two modes.
The mode settings are as follows:
•
Recirculation Control
Air is recirculated inside the vehicle. You
may choose between Bi-Level and Panel air
outlets while in this mode. Use this mode to
temporarily block out any outside odors,
smoke, or dust and to cool the interior rapidly upon
initial start up in very hot or humid weather.
•
Panel
Air is directed through the outlets in the instru-
ment panel. These outlets can be adjusted to
direct air flow.
•
Bi-Level
Air is directed through the instrument panel and
floor outlets. A small amount of air is also
directed through the defrost outlets.
NOTE:
There is a varying temperature differential be-
tween the upper and lower outlets for added comfort.
The warmer air goes to the floor outlets. This feature
provides improved comfort during sunny but cool con-
ditions.
•
Floor
Air is directed through the floor outlets with a
lesser amount through the defrost outlets.
124
UNDERSTANDING YOUR INSTRUMENT PANEL
Summary of Contents for 2013 VIPER SRT
