When parking on a hill, it is important to apply the
parking brake before placing the shift lever in PARK,
otherwise the load on the transaxle locking mechanism
may make it difficult to move the shift lever out of PARK.
As an added precaution, turn the front wheels toward the
curb on a downhill grade and away from the curb on an
uphill grade.
The foot operated parking brake is positioned below the
lower left corner of the instrument panel. To apply the
parking brake, push the parking brake pedal down and
then remove your foot from the pedal. To release the
parking brake, push down on the parking brake pedal
and then release.
The “Brake Warning Light” in the instrument cluster will
turn on when the parking brake is applied and the
ignition switch is in the ON position.
NOTE:
This light only shows that the parking brake is
applied. It does not show the degree of brake application.
Parking Brake
312
STARTING AND OPERATING
Summary of Contents for 2010 Journey
