Dodge 2010 Journey, Manual

Page: 131 / 504

NOTE: In order to ensure proper operation, the Elec-
tronic Speed Control System has been designed to shut
down if multiple Speed Control functions are operated
simultaneously. If this occurs, the Electronic Speed Con-
trol System can be reactivated by pushing the Electronic
Speed Control ON/OFF button and resetting the desired
vehicle set speed.
To Activate
Push and release the ON/OFF button located
on the end of the speed control lever. The
Cruise Indicator Light in the instrument cluster
will illuminate. To turn the system off, push
and release the ON/OFF button a second time. The
Cruise Indicator Light will turn off. Be sure to turn the
system off when it is not in use.
NOTE: The Electronic Speed Control System will auto-
matically turn off when the engine is turned OFF.
WARNING!
Leaving the Electronic Speed Control system on
when not in use is dangerous. You could accidentally
set the system or cause it to go faster than you want.
You could lose control and have an accident. Always
leave the system off when you are not using it.
To Set a Desired Speed
When the vehicle reaches the speed desired, press down-
ward on the lever to SET DECEL and release. Release the
accelerator pedal and the vehicle will operate at the
selected speed.
NOTE:
•
The vehicle must be traveling at least 25 mph
(40 km/h) for the speed control to set.
•
The vehicle should be traveling at a steady speed and
on level ground before pressing the lever to SET
DECEL.
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131