Dodge 2010 Challenger SRT Owner'S Manual Download Page 40 | Manualshive

Page: 40 / 444

Dodge 2010 Challenger SRT Owner'S Manual Download Page 40

of ejection and the risk of injury caused by striking the
inside of the vehicle. Everyone in a motor vehicle should
be belted at all times.

Lap/Shoulder Belts

All seating positions in your vehicle are equipped with
lap/shoulder belts.

The belt webbing retractor is designed to lock during
very sudden stops or impacts. This feature allows the
shoulder part of the belt to move freely with you under
normal conditions. However, in an accident, the belt will
lock and reduce your risk of striking the inside of the
vehicle or being thrown out.

WARNING!

•

It is dangerous to ride in a cargo area, inside or
outside of a vehicle. In an accident, people riding
in these areas are more likely to be seriously
injured or killed.

•

Do not allow people to ride in any area of your
vehicle that is not equipped with seats and seat
belts.

•

Be sure everyone in your vehicle is in a seat and
using a seat belt properly.

•

Wearing a seat belt incorrectly is dangerous. Seat
belts are designed to go around the large bones of
your body. These are the strongest parts of your
body and can take the forces of an accident best.

(Continued)

38

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
38
39
40
41
42
...
»

Summary of Contents for 2010 Challenger SRT





























































































































































































































































































































































































































































Reviews:

No comments