Dodge 2007 KA Nitro, Owner'S Manual

Page: 87 / 436

Operations
Voice commands can be used to operate the UConnect™
system and to navigate through the UConnect™ menu
structure. Voice commands are required after most
UConnect™ system prompts. You will be prompted for a
specific command and then guided through the available
options.
•
Prior to giving a voice command, one must wait for
the beep, which follows the
⬙
Ready
⬙
prompt or another
prompt.
•
For certain operations, compound commands can be
used. For example, instead of saying
⬙
Setup
⬙
and then
⬙
Phone Pairing,
⬙
the following compound command
can be said:
⬙
Setup Phone Pairing.
⬙
•
For each feature explanation in this section, only the
combined form of the voice command is given. You
can also break the commands into parts and say each
part of the command, when you are asked for it. For
example, you can either use the combined form voice
command
⬙
Phonebook New Entry,
⬙
or you can break
the combined form command into two voice com-
mands:
⬙
Phonebook
⬙
and
⬙
New Entry.
⬙
Please remem-
ber, the UConnect™ system works best when you talk
in a normal conversational tone, as if speaking to some
one sitting eight feet away from you.
Voice Command Tree
Refer to “Voice Tree” at the end of this section.
Help Command
If you need assistance at any prompt, or if you want to
know your options are at any prompt, say
⬙
Help
⬙
follow-
ing the beep. The UConnect™ system will play all the
options at any prompt if you ask for help.
To activate the UConnect™ system from idle, simply
press the ’Phone’ button and follow audible prompts for
directions. All UConnect™ system sessions begin with a
press of the ’Phone’ button on the radio control head.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 87
3