Dodge 2007 KA Nitro, Owner'S Manual

Page: 94 / 436

NOTE: The UConnect™ system compatible phones in
market today do not support rejecting an incoming call
when another call is in progress. Therefore, the user can
only either answer an incoming call or ignore it.
Making a Second Call while Current Call in
Progress
To make a second call while you are currently in a call,
press the ’Voice Recognition’ button and say
⬙
Dial
⬙
or
⬙
Call
⬙
followed by the phone number or phone book
entry you wish to call. The first call will be on hold while
the second call is in progress. To go back to the first call,
refer to
⬙
Toggling Between Calls.
⬙
To combine two calls,
refer to
⬙
Conference Call.
⬙
Place/Retrieve a Call from Hold
To put a call on hold, press the
⬘
Phone’ button until you
hear a single beep. This indicates that the call is on hold.
To bring the call back from hold, press and hold the
⬘
Phone’ button until you hear a single beep.
Toggling Between Calls
If two calls are in progress (one active and one on hold),
press the ’Phone’ button until you hear a single beep
indicating that the active and hold status of the two calls
have switched. Only one call can be placed on hold at one
time.
Conference Call
When two calls are in progress (one active and one on
hold), press and hold the ’Phone’ button until you hear a
double beep indicating that the two calls have been
joined into one conference call.
Three-Way Calling
To initiate three-way calling, press the ’Voice Recogni-
tion’ button while a call is in progress and make a second
phone call as described under
⬙
Making a Second Call
while Current Call in Progress.
⬙
After the second call has
94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE