Dodge 2007 KA Nitro Owner'S Manual Download Page 147

Page: 147 / 436

WARNING!

To Avoid Serious Injury or Death:

•

Do not use a 3—Prong Adaptor.

•

Do not insert any objects into the receptacles.

•

Do not touch with wet hands.

•

Close the lid when not in use.

•

If this outlet is mishandled it may cause an
electric shock and failure.

CUP HOLDERS

In the center console there are two cup holders for the
front seat passengers.

NOTE:

The cup holder insert is removable from the

console, for cleaning.

Front Cup Holders

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

147

Summary of Contents for 2007 KA Nitro





















































































































































































































































































































































































































































Search results

Summary of Contents for 2007 KA Nitro

Reviews:

Related manuals for 2007 KA Nitro

Brands by name

Popular brands

Dodge 2007 KA Nitro, Owner'S Manual

Search results

Summary of Contents for 2007 KA Nitro

Reviews:

Related manuals for 2007 KA Nitro

Brands by name

Popular brands