17
Put anti-seize grease on the bolt threads, to prevent the anchor bolts from locking
before reaching the torque.
After having built the mixer into the roof, tighten the anchor bolts.
Check the bolt tightening after a few days.
6.2.3 Mixer with wall mounting
Before mounting the mixer, check the dimensions of the hole made in the wall, as well as the
correct mixer positioning.
Any changes have to be promptly agreed with the manufacturer absolutely before the
mounting.
Remove any possible impurities or insulating material present on the surface where you have
to install it.
Check the flatness of the mounting and sealing surface and take the necessary improvements.
We recommend that you should use a suitable sealant between the mounting frame and the
foreseen installation surface.
To make the 12mm holes, use a drill plate. Before fixing the drill plate, make a hole.
Attention! Follow the instruction for anchor bolt fixing.
After having fixed the first bolt, position the mounting frame on the tank wall by means of a
forklift truck.
Before making the left over holes, check again the exact positioning of the mixer.
For further mounting operations, follow the instructions given in paragraph
6.2. 1 General
instructions
.
