16
Only adults can use the machine and absolutely in a place not accessible to children.
Before any operation, check the stability of the whole working unit (machine and
tractor).
Do not carry out any repair, adjustment or maintenance operations if the unit is working
or supplied.
Cover the tank if you have not to work in it.
We recommend that the machine should be employed with all protections properly
positioned, according to the instructions mentioned in the previous paragraphs, in order
to avoid any contact with moving parts.
Do not damage or remove these protections.
During operating, maintenance or adjustment, the rubber parts of the machine (gaskets,
etc...) have not to come into contact with oil, grease or oil derivatives.
In case you do not use the machine for long time, keep it in a dry place and protected
against bad weather.
6.2.2 Mixer with roof mounting
Before mounting the mixer, check the dimensions of the hole made in the roof. Remove any
possible impurities present on the surface where you have to install it.
Check the flatness of the mounting and sealing surface and take the necessary improvements.
We recommend that you should use a suitable sealant between the mounting frame and the
foreseen installation surface.
To make the 12mm holes, use a drill plate. Before executing the first hole, line the plate with
the roof opening, so that the mixer could be correctly fixed with the anchor bolts.
In order not to move the drill plate, set the first fixing anchor bolt immediately after the first
hole has been made and press the plate firmly on the tank roof. Then you can go on with all
other holes.
To make the fixing operations easier, all other anchor bolts can be set after the mounting
frame installation.
In order to insert the anchor bolts easily and in the best way, clean the holes made
with compressed air and remove dust present on the hermetic surfaces.
Attention! Follow the installation instructions of the fixing anchor bolts!
