C L 1 U S E R S G U I D E
D O D T E C H N O L O G I E S , I N C
Rev 10.07
Page 15
5.4.b System Faults (Figure 5.8)
See section 5.2 for the use of the fault/alarm screens. The <F4> key is available to clear
messages from the detail screen. The <ESC> key will return to the main menu.
Figure 5.8
5.4.c Gas Alarms (Figure 5.9)
See section 5.2 for the use of the fault/alarm screens. The <F4> key is available to clear
messages from the detail screen. The <ESC> key will return to the main menu.
Figure 5.9
5.4.d Gate & Tape (Figure 5.10)
Touch the lower left <GATE> soft key to open or close the gate. When a new Chemlogic
tape is loaded press the <RESET> soft key to reset the counter for a new tape. The tape
windows remaining displays the number of tape advances expected before the tape is empty.
This number is used in the calculation of the warning message “Chemlogic Tape Low”.
Press the <DONE> soft key to return to the main menu.
Figure 5.10
5.4.e Alarm Levels (Figure 5.11)
Use the arrow keys below the screen to select between Alarm 1 and Alarm 2. Notice the
dotted line around the currently selected field. To enter a new alarm level follow the
procedure outlined in section 5.1There are several errors that can occur and will be displayed
in the “Status Area” of the screen. . Press the <DONE> soft key to return to the main menu.
Figure 5.11
Status Area
