Docomo SO-51A, Instruction Manual, Page: 44 / 262

42 Before using the terminal
To charge the terminal by connecting to a PC,
USB cable A to C 02 (optional) is required.
1
Insert a Type-C plug of the USB
cable A to C horizontally into the
USB Type-C jack of the terminal.
2
Insert a USB plug of the USB cable
A to C to a USB port of a PC.
･ When charging is started with the
power on, the charging start sound is
heard and the notification LED of the
terminal turns on (P.64).
･
When a screen for requesting access to
the device data appears, tap [DENY].
･
If the installation screen for the
terminal's driver software appears on
your PC, please wait a moment for the
installation to complete.
･
When the confirmation screen of
installing software appears on the
terminal, tap [SKIP] or [CANCEL].
3
When charging is complete,
remove the USB plug of the USB
cable A to C from the USB port of
PC and then remove the Type-C
plug horizontally from the
terminal.
❖
Note
･ Do not connect the Type-C plug of the USB cable A
to C forcibly. Wrong connection may cause damage.
Charging with a PC