Appendix/Index
170
If using the microUSB cable for PC
connection (sample), connect it
directly to the USB port of a PC that
is receiving power.
P.52
If using the microUSB cable for PC
connection (sample), has the
terminal battery depleted? Connect
after charging for approx. 5 minutes
with an AC adapter.
P.52
If using the microUSB cable for PC
connection (sample), is the
connector on the PC side and the
connector on the terminal side
securely connected?
P.52
If you make a call, perform data
communication, or use some other
function for a long time while
charging, the terminal may become
hot and charging may be stopped.
In this case, charge again after the
terminal cools down.
-
Operation of the terminal
■
Becomes hot during operations or charging.
The terminal, battery pack, or
adapter may become hot during
operations or charging, or if you use
the camera function or view/record
1Seg for a long time while charging.
This is not a safety hazard, so you
can continue to use them.
-
If you use the camera function or
view/record 1Seg for a long time,
the terminal may become hot and
the camera function or 1Seg may
end. Wait a while before restarting
to use the camera function or 1Seg.
-
Battery usage time is short.
Has the terminal been out of the
network service area for a long
time?
As the terminal searches for radio
waves in order to enable
communication when out of the
network service area, more
electricity is consumed than usual.
-
The battery pack usage time varies
depending on the usage conditions
and the degradation level.
P.49