Applications
139
Since the camera consumes more battery
power during shooting, you are advised to
turn off the camera as soon as you finish
shooting. Operating the camera on low
battery may result in a dark or blurry
screen.
If reduce camera shake (photos) or image
stabilization (videos) is set to OFF, moving
the terminal during shooting may result in
blurry images. Whenever possible, it is
recommended to set image stabilization to
AUTO when shooting.
If the battery is low, you may not be able
to save your photos and videos.
Even in Silent mode, the camera makes the
shutter sound for photo shooting and the
video recording start/end sound. You
cannot change the volume of these sounds
or turn them off.
The screen may flicker due to the effect of
a fluorescent light when you take a photo
indoors. In this case, you may reduce
flickering by setting "Anti-flicker" to your
local power frequency.
The shot-ready LED flashes during camera
starting.
Camera
Before using the camera
■
While the camera is built with high-precision
technology, there may be cases where you
see one or more partially dark or constantly
bright points or lines. Note also that, when
you shoot in a dark place, the camera may
have more noise such as white lines.
Before shooting, clean the lens with a soft
cloth. A fingerprint or grease marked on
the lens may put the camera out of focus
or result in a blurry photo.
After the terminal is left in a warm place
for a long time, the image quality may
degrade.
The brightness and color in your photos
and videos may differ from those of the
actual object.
Avoid leaving the lens exposed to direct
sunlight for a long time or directly shooting
the sun or a bright lamp. Doing so may
cause malfunction, such as discoloration of
shot images.
When shooting, take care not to have your
finger or hair or the strap block the lens.
Applications