Using Overseas
164
You can use packet communication service
overseas at daily capped pricing by manually
connecting to the operator providing desired
service in "Network operators". To use the
flat-rate pricing service, you are required to
subscribe to it. For details, see "Mobile Phone
User's Guide [International Services]" or the
DOCOMO "International Services website".
About screen display
■
The type of network you are using is indicated in
the status bar on the screen.
: Roaming
/
: GPRS communicating / available
/
: 3G communicating / available
The network operator you are connecting is
shown on Notifications panel.
The date and time
■
If the date and time are configured to update
automatically, the time and time zone of the
terminal's clock will be automatically changed
when information about the local time and time
zone is received from the network of the
overseas operator to which you are connected.
→
P.117
The date and time setting may not work
properly depending on the network of the
overseas operator. Set manually in such a
case.
The timing of these changes varies depending
on the overseas operator.
Inquiries
■
If the terminal or miniUIM is lost or stolen
overseas, contact DOCOMO immediately from
your current location and carry out the
procedure to suspend usage. For contact
information, refer to the last page of this
manual. Please note that you are liable for any
call or communication charges incurred after
the loss or theft of the terminal.
You will need the country's international call
access code or universal number international
prefix if calling from a land-line phone from
overseas.
After returning to Japan
When you return to Japan, the terminal
automatically connects to the DOCOMO
network. If it is unable to connect, change
the following settings.
Set "Network Mode" to "Auto".
→
P.165
In the settings of "Network operators", set
"Available networks" to "Select
automatically".
→
P.165