9
OPERATION
SAFETY PRECAUTIONS
USING THE SAW BAND SELECTOR
1.
Refer to the Saw Band Selector label located on
the drive motor cover for information about blade
choice and pitch, and suggested band speed for
stock type and thickness.
Saw Band Selector.
2.
For example, to cut low carbon steel which is two
(2) inches (50.8 mm) thick, you would choose a saw
band with 5-8 pitch, and set the band speed for 275
fpm (84 m/min).
CUTTING CAPACITY
1.
Your machine is designed to cut retangular stock up
to 14 inches (355.6 mm) high and 20 inches (508.0
mm) wide. It will also cut round stock up to 14.75
inches (374.6 mm) in diameter.
2.
With the saw head adjusted for 45° cutting, the
machine will saw retangular stock up to 14 inches
(355.6 mm) high and 13 inches (330.2 mm) wide
and round stock up to 13 inches (330.2 mm) in
diameter.
3.
With the saw head adjusted for 60° cutting, the
machine will saw retangular stock up to 14 inches
(355.6 mm) high and 9 inches (330.2 mm) wide
and round stock up to 13 inches (330.2 mm) in
diameter.
4.
The index length range is .25 to 40 inches (6.4 to
1016.0 mm) or up to 320 inches (26.67 feet/8128.0
mm) with multiple indexing capability; minimum
indexable stock length is 14 inches (355.6 mm).
5.
Vise bed capacity is approximately 1800 pounds
(816.5 kg) evenly distributed with NO impact.
Warning Label - READ and UNDERSTAND.
Summary of Contents for 500SNC
