DNT MemoPen Data, Owner'S Manual

Page: 24 / 52

- 24 -
English
Playback
During pause mode, the Auto Power Off (APO) function is
switched off.
Repeat part of a message
With this function you can repeat part of a message.
Start playback (ref. playback ). When you reach the point from which you
want to have your message repeated, press the MENU button (jog slide key)
for a short time. The display shows the repeat icon. The message is
still played until you reach the point where you press the MENU button (jog
slide key) for a short time again to fi nish the part you want to repeat. The
display now shows the
icon, and the repeated playback starts. If
you don’t select a second point to stop the repeating of the message, the
message will be repeated from the selected point to the end of the message.
To stop the repeated playback, press the
PLAY/STOP - or the MENU - button
(jog slide key).
Continous play
With this function all messages in one folder can be played one after the other automati-
cally.
1. Make sure that the HOLD switch is in the OFF position and press one of
the following buttons: REC/STOP , PLAY/STOP or FUNC/DISP to switch
on the unit.
2. Press the MENU -button (jog slide key) 6 x for a short time, on the display
CONTI
appears.
3. Use the / button (jog slide key) to select the continuous play (on or
off). On the display appears
ON
for continuous play or
OFF
to stop the
continuous play.
4. To start the continuous play, use the / button (jog slide key) in order
to select the message from which you want to start the continuous play
and press the
PLAY/STOP -button.