- 20 -
English
Record
Record
The recording can be done with the internal microphone (at the top of the unit) or by an
external microphone (as option available).
Proceed as follow:
1. Make sure that the
HOLD
switch is in the
OFF
position and press one of
the following buttons:
REC/STOP
,
PLAY/STOP
or
FUNC/DISP
to switch
on the unit.
2. Select the folder where you want to store the message (ref. Special func-
tions
Folder
).
3. Place the recorder close to the mouth or any other sound source you
want to record, and press the
REC/STOP
button to start the recording.
4.
REC
appears on the display for about 2 seconds, now the recording
mode is started. The number of the recorded message, the selected play
mode and the recording time is shown on the display. Also the
REC
icon
appears on the display and the operating icon starts to move.
The recorder numbers the messages automatically.
To stop the recording, press the
REC/STOP
button.
Unless the
HOLD
switch is in
ON
position, it is impossible to
stop the recording.
Pause during recording
To make a pause during recording, press the
FUNC/DISP
button. The dis-
play shows
PAUSE
and the operation icon is fl ashing. To restart the record-
ing, press the
FUNC/DISP
- or
REC/STOP
button. The number of message
do not be increased.
Summary of Contents for MemoPen Data
