DNT MemoPen Data, Owner'S Manual

Page: 15 / 52

- 15 -
English
Specical functions
Record/ Play Mode
There are two record/play modes available: Long Play (LP), Standard Play (SP) and
High Quality (HQ). The High Quality - mode (HQ) has 304 minutes play time with
high speech quality, the Standard Play- mode (SP) has 548 minutes play time with
a little lower speech quality and Long Play- mode (LP) has 1002 minutes play time
this speech quality is in most cases suffi cient.
1. Make sure that the HOLD -switch is in the OFF position and press one of
the following buttons: REC/STOP , PLAY/STOP or FUNC/DISP to switch
on the unit.
2. Press the MENU button (jog slide key) 2 x for a short time, on the display
MOD
appears.
3. Use the / button (jog slide key) to select the Record/ Play Mode. On
the display
SP
for Standard Play and
HQ
for High Quality appears.
Display of recording information
To see the recording date/time from a recorded message, proceed as follows:
1. Make sure that the HOLD -switch is in the OFF position and press one of
the following buttons: REC/STOP , PLAY/STOP or FUNC/DISP to switch
on the unit.
2. Select a fi le where the message is stored (ref. File Specical-Function
(Voice Recorder)).
3. Press the / button (jog slide key) to select the message.
4. Press the FUNC/DISP -button for more than 1 second. The actual date/
time appears on the display.
5. Press the FUNC/DISP -button for a short time again. The display now
shows REC DATE and the date and time when the message was
recorded.