DNT MemoPen Data, Owner'S Manual

Page: 17 / 52

- 17 -
English
Specical functions
Remaining recording time
With this function you can see the remaining recording time, it shows in minutes and
seconds. The calculation is based on the selected recording mode HQ,SP or LP.
Proceed as follows:
1. Make sure that the HOLD -switch is in the OFF position and press one of
the following buttons: REC/STOP , PLAY/STOP or FUNC/DISP to switch
on the unit.
2. Press the FUNC/DISP -button for more than 1 second. The actual date/
time appears on the display.
3. Press the FUNC/DISP -button 2 x for a short time again. The display now
shows the remaining time in minutes and seconds.
Folder
To store messages according to their priority, up to 3 folders are available. (A,B,C)
1. Make sure that the HOLD -switch is in the OFF position and press one of
the following buttons: REC/STOP , PLAY/STOP or FUNC/DISP to switch
on the unit.
2. Press the MENU -button (jog slide key) 1 x for a short time, on the display
FOLD
appears.
3. Use the / button (jog slide key) to select the folder where messages
are to be stored or played. The selected fi le is shown on the display.
Lock message fi le
To avoid unintentional erasing of message fi les, you can lock the message.
1. Make sure that the HOLD -switch is in the OFF position and press one of
the following buttons: REC/STOP , PLAY/STOP or FUNC/DISP to switch
on the unit.
2. Use the / button (jog slide key) to select the messages you want to
lock.
3. Press the MENU -button (jog slide key ) 5 x for a short time, on the display
LOCK
appears.