LK-400 Operation Manual
Auto Slide Preparation System Extension Module Package
３１
7 Manual Input Mode
The Manual Input Mode operation enables edition of the item, addition and deletion of the conditions
for each sample individually. If the temporary folder (
∖
TmpData ) has a sample data, the registered
contents can be displayed in the monitor by manual input of the sample block barcode or by input
with handy barcode reader. If there is no sample data, the section preparation can be operated by
inputting sectioning information and the print information for the sample numbers on the PC screen.
7 – 1 Description of the Manual Input Mode
Manual Input Mode
Initial screen of Manual Input Mode
Start:
Start sectioning after entering the sectioning information.
Acquire sample information:
system reads the sectioning condition if the sample
block ID data is saved in the reference data folder.
Clear the table
：
Delete the entered data.
Add Condition
：
Add a line for the sectioning condition.
Remove Section Folder
：
Delete a line for the sectioning condition.
Change Reference Folder
：
Specify the data of the referencing folder (
∖
TmpData
at start-up). Retry to specify if the screen was closed once.
I
nput sample information manually
：
When ON, Manual Input is available, not
only for the Block ID but also it is available for other items.
Sepecimen Information Auto Read:
When
ON, by entering Block ID, the system
will read automatically from the reference data.
Summary of Contents for LK-400
Page 2: ......
Page 46: ...Auto Slide Preparation System Extension Module Package...
