LK-400 Operation Manual
Auto Slide Preparation System Extension Module Package
２９
6 – 3 Retry Mode operation start
Main Menu screen
Preoperational check screen
1. Click SLIDE PREPARATION (ONLINE) of the Main
Unit touch panel.
2. The operational check screen will be displayed. Check
the blade, the tape, the remaining slide numbers, the
drip water and the humidify water that are prepared
sufficiently for the process. Click OK.
3. Select the tray number with the blocks to be sectioned.
(A System with the 24-sample feeder does not have this
step.)
4. Change the Slide preparation settings or ON/OFF
settings for each operation conditions as needed.
Check other settings such as roughing and polishing,
then touch START .
Preoperational blade change: Changes the blade
pre-operationally when
ON.
Print: Prints onto the slides when ON.
Auto trimming: Auto trimming with ON.
RATIO (%)
:
Set the trimming ratio (%).
Blade mark detection : Detects blade marks when ON.
ABORTED : System changes the blade if the blade
marks are detedted consecutively.
Slide preparation start screen
(AS-410 panel screen)
Sample selection screen
Summary of Contents for LK-400
Page 2: ......
Page 46: ...Auto Slide Preparation System Extension Module Package...
