DNH DHVC5000 Series, Use Manual

Page: 15 / 48

12
Fig.1-14 Flying and PID setting
1.3.2 Control Parameters
Click the ‘Control’ button on the Parameter Setup Screen to set the MVC control parameters,
as shown in Fig.1-15:
Fig.1-15 Control Parameter Window
Click the ‘Motor Direction’ and then select ‘Forward’, and then motor will forward running’; on
the contrary, if you select ‘Reverse’, motor will reverse running.
Click‘control mode’,and select ‘local’,then control MVC relevant operation by touch screen;
select‘remote’, then control MVC relevant operation by remote operation machine.
Click closed loop preset mode,select‘local’,then the closed loop preset value may be set by
touch screen; select‘communication’,then the closed loop preset value may be set by MODBUS
communication; select‘analog’, then the closed loop preset value may be set by external 4-20mA
analog signal.
Click remote mode,select‘digital’,then MVC start,stop command may be controlled by
external digital signal;select‘communication’, then MVC start,stop command may be controlled