DNH DHVC5000 Series, Use Manual

Page: 14 / 48

11
Fig.1-12 V/F Curve Setting
When the MVC control mode is vector control, the V/F curve settings in the speed regulation
parameters is shown in Fig.1-13:
Fig.1-13 Vector V/F Curve Setting
Fig.1-14 Shows the flying control setting and process PID closed loop settings in speed
regulation parameters.
MVC with flying start function,once received start command again,search the inertia speed of
the motor,and start motor at the inertia speed frequency,which will reduce delay and impact.
MVC process PID closed loop function may enable MVC to achieve external closed loop
adjustment for one certain control subject.