DMX-LED-Dimmer X9
7
DMX-Addressing
The DMX-start-address is adjustable about the counters 1until 9.
Thereby switch 1 has the valency 2
0
(=1), switch 2 the valency 2
1
(=2) and so on until
switch 9 has the valency 2
8
(=256). The sum of the values of the counters standing
on ON corresponds to the start address.
Counter 10 is exclusively for the StandAlone-Function and has to show the DMX-
mode OFF.
OFF
ON
1
2
3
4
5
6
7
8
9
10
LED-Display-Codes
The integrated LED is a Multi-functional-display.
In the normal DMX-mode the LED lights up nonstop. In this case the device is
working.
Also the LED signalled the operation status.
In this case the LED lights up in short pitches and then and then turns into off modus.
The Number of flashing signals is equal to the Number of the error status:
Error
Status
Error
Description
1
No DMX
There is no DMX-Signal coming into the dimmer
2
Address error
Check if a valid DMX starting address is adjusted at
the DIP-switch.
4
Factory Reset
Factory Reset is complete
1
2
4
8
1
6
3
2
6
4
1
2
8
2
5
6
O
F
F
