DMX-LED-Dimmer X9
2
For your own safety, please read this user manual and warnings
carefully before installation.
Description
The
DMX-LED-Dimmer X9
is especially designed for controlling RGB LED-Stripes
with common anode (PLUS) or for using single coloured LED-Stripes.
9 Outputs
The device has 9 High-Power PWM-Outputs which are independently controllable
with DMX. All outputs are designed in the same way, so that single-color, RGB or
RGBW LEDs can be connected.
High Power Outputs
Each output can operate loads up to 10A
This results in a maximum load of 120W (12V) / 240W (24V).
0% bis 100% dimmbar
The connected LEDs are dimmed from 0% up to 100% via PWM.
For voltages from 12V up to 24V
The DMX LED dimmer X9 works with supply voltages from 12V up to 24V.
The LED voltage can vary per output so a DMX-LED-Dimmer X9 can control different
LED systems.
RDM support
The DMX-LED-Dimmer X9HR allows configuration by RDM via DMX.
LED-State Display
The DMX state is indicated via the LED status.
Stand-Alone Function
Alternatively, to DMX control, internal color gradients can be called up via the
address switches without external DMX control.
Top-hat rail housing available
The top-hat rail housing 1050 is available as accessory for the DMX-LED-Dimmer
X9HR.
Together with the top-hat rail housing 1050, the interface is optimally suited
for control cabinet installation.
