DMX-LED-Dimmer X9
8
DMX-Fail option
from 06/2013 (Version 2)
The DMX-LED-Dimmer X9 can hold the last value, switch on or switch off the LED
outputs on DMX fail.
This DMX-Fail option is selectable with the
Jumper.
ALL ON:
All outputs switched OFF (100%)
ALL OFF:
All outputs switched ON (0%)
HOLD:
Last value is HOLD
Or RDM settings are used
After switching the power off the hold values will be not restored.
In this case the values will be 0 (OFF) after switching the power on again.
The level can also be set via the RDM parameter DMX_FAIL_MODE. For
RDM operation the jumper must not be set.
