DMX-LED-Dimmer X9
14
Factory Reset
Before running the Factory Reset, read all steps carefully.
To reset the
DMX-LED-Dimmer X9
to delivery state, proceed as follows:
-
Turn off device (disconnect power supply !)
-
Set DIP switch 1 up to 10 to ON
-
Turn on device (connect power supply)
-
The LED lights up 20x during ca. 3 seconds
While the LED lights up set DIP switch 10 to OFF
-
Now, the Factory Reset is executed
The LED lights up with error code 4
-
Turn off device (disconnect power supply !)
-
Now, the device can be used
If a Factory Reset is needed again, this procedure can be repeated at any
time.
