![background image](http://html1.mh-extra.com/html/dmx4all/dmx-led-dimmer-cc1/dmx-led-dimmer-cc1_user-manual_2514383009.webp)
DMX-LED-Dimmer CC1
9
RDM
(up to Hardware V1.3 with Firmware V1.3 or higher)
RDM is the shortcut for
R
emote
D
evice
M
anagement.
As soon as the device is in the system, device-dependent settings can be made
remotely via RDM command due to the uniquely assigned UID. A direct access to the
device is not necessary.
If the DMX start address is set via RDM, all address switches at the DMX-LED-
Dimmer CC1 must be set to OFF ! A DMX start address set via the address
switches always has priority !
This device supports the follwoing RDM commands:
Parameter ID
Discovery
Command
SET
Command
GET
Command
ANSI/
PID
DISC_UNIQUE_BRANCH
E1.20
DISC_MUTE
E1.20
DISC_UN_MUTE
E1.20
DEVICE_INFO
E1.20
SUPPORTED_PARAMETERS
E1.20
PARAMETER_DESCRIPTION
E1.20
SOFTWARE_VERSION_LABEL
E1.20
DMX_START_ADDRESS
E1.20
DEVICE_LABEL
E1.20
MANUFACTURER_LABEL
E1.20
DEVICE_MODEL_DESCRIPTION
E1.20
IDENTIFY_DEVICE
E1.20
FACTORY_DEFAULTS
E1.20
DMX_PERSONALITY
E1.20
DMX_PERSONALITY_DESCRIPTION
E1.20
DMX_FAIL_MODE
E1.37
SERIAL_NUMBER
1)
PID:
0xD400
1) Manufacturer depending RDM control command (MSC - Manufacturer Specific Type)