![background image](http://html1.mh-extra.com/html/dmx4all/dmx-led-dimmer-cc1/dmx-led-dimmer-cc1_user-manual_2514383008.webp)
DMX-LED-Dimmer CC1
8
DMX-FAIL Function
The
DMX-LED-Dimmer CC1
has a DMX-FAIL Function, which stores the last value
after a DMX-Signal failure. This function leaves the output unchanged (HOLD) or
activated with 100% (ALL ON).
A power failure occurs that the last value will be rejected !
If the DMX-HOLD Function is not activated so through the output 0% will be
outputted.
The DMX-HOLD Function can be activated via switch 7 and 8 during the operating
mode adjustment:
Switch 7 OFF
DMX-FAIL ALL ON not active
Switch 7 ON
DMX-FAIL ALL ON active
Switch 8 ON
DMX-HOLD active
Switch 8 OFF
DMX-HOLD not active
Via the RDM parameter DMX_FAIL_MODE the level can be adjusted
also.