31
IMPORTANT:
CALIBRATE THE NEW FORCE TRANSDUCER BEFORE PERFORMING A NEW EXPERIMENT, AS DESCRIBED
IN “CHAPTER 3 - THE INTERFACE MENUS” ON PAGE 17 AND “4.1 CALIBRATION OF THE FORCE
TRANSDUCER” ON PAGE 27.
Figure 4.5 The transducer in the transducer housing and close-up of transducer pin inside the transducer
The arrow indicate the place that the grease needs to be applied to prevent water and buffer from damaging the
transducer.
Figure 4.6 Close-up of transducer pin from outside
The arrow indicate the place that the grease needs to be applied to prevent water and buffer from damaging the transducer.
