25
SELECT
Force in gram:
ENTER
SELECT mN OR GRAM
When the wanted force unit is shown press ENTER to select this
force unit. The color of the text will turn black when it is saved in
the system.
NOTE: For DMT device enabler users (no Powerlab) it is very important to restart Labchart Pro after
changing the force units otherwise the force units will NOT be transferred to Labchart.
SET MYOGRAPH TYPE
SELECT
SELECT
SELECT
SELECT
Type DMT630M:
ENTER
Type DMT720MO:
Type DMT820MS:
Type DMT620M:
V. Factory Diagnostics
Entering FACTORY DIAGNOSTICS will display the LOGIN CODE TO
DIAGNOSTICS window. This window is for trained technicians and
used for diagnostics and troubleshooting purposes. The general
user will not have access to this window. Entering the proper
5-digit pin number, however, will allow the trained technician
access to Diagnostics panels that will provide information during
a malfunction or mechanisms to change other settings controlled
by the onboard computer.
VI. Myograph Type
The interface of the 820MS system is identical to the interfaces of
the DMT 620M Multi Myograph, 720MO Organ Bath and 630MA
Muscle Strip Myograph system. The difference between these
three systems is the chambers. This make it possible to combine
the four different type of chambers on this Interface. There are
small differences in the menu’s of these four systems and to shift
between these different menu’s the user can load these into the
interface using the myograph Type menu.
