Digital Monitoring Products
iComSL
Series Universal Communicator Installation and Programming Guide
24
z-wave setup
17.8 ADD Devices to FAVORITES
1. Access the User Menu.
2. Press COMMAND until ZWAVE SETUP? displays.
3. Press any Select key. The keypad displays ADD LIST REMOVE.
4. Press COMMAND again to display FAV XFER OPT. Select FAV and FAVORITE NUMBER: - is displayed.
5. Enter a Favorite number between 1 and 20 and press COMMAND.
6.
The Favorite number and name displays. Press
COMMAND and the Favorite Name and ADD EDIT REMOVE
displays.
7. Select ADD and the first Z-Wave device stored in the system that has not already been added to this
Favorite
is displayed. Remaining devices can be viewed by pressing the
COMMAND key.
8. Press any Select key to assign the displayed device to the
Favorite. The device name and the current device
settings display. When added to a Favorite, a Z-Wave device can be programmed to respond to various ON/
OFF/LOCK/UNLOCK/HEAT/COOL commands based on your desired settings. To change a device setting, See
Device Settings in Favorites.
17.9 Device Settings in FAVORITES
Lights
1. Press any Select key at SETTING: and ON OFF DIM displays. Press the Select key under the desired setting.
2. For ON or OFF setting, when selected, the
Favorite name and the next
Z-Wave device stored in the system
displays.
3. For DIM setting, DIM LEVEL: with the current setting displays. To change the setting, press any Select key
and enter the new level (1 - 10) and Press COMMAND.
4. The
Favorite name and the next
Z-Wave device stored in the system displays.
Doors
1. Press any Select key at SETTING: and LOCK UNLOCK for Doors and OPEN CLOSE displays for Garage Doors.
To change the setting, press the Select key under the new setting.
2. The
Favorite name and the next
Z-Wave device stored in the system displays.
Thermostats
1. Press any Select key at SYSTEM: and OFF CL HT displays. To change the setting of OFF, COOL or HEAT, press
the Select key under the new setting.
2. Select OFF to display FAN SETTING:.
3. Press any Select key and ON AUTO displays. Press the Select key under the desired new setting to change.
4. Select CL to display COOL.
5. To change the setting, press any Select key, enter the new temperature and press COMMAND.
6. Press any Select key and the keypad displays
FAN SETTING:.
7. Press any Select key and ON AUTO displays. Press the Select key under the desired new setting to change.
8. Select HT to display HEAT.
9. To change the setting, press any Select key and enter the new temperature and Press COMMAND.
10. Press any Select key and the keypad displays
FAN SETTING:.
11. Press any Select key and ON AUTO displays. Press the Select key under the desired new setting to change.
12. The
Favorite name and the next
Z-Wave device stored in the system displays.
Note:
A maximum of 25 devices can be assigned to each Favorite. When attempting to add a device and the
maximum number of devices has been assigned, FAVORITE FULL is displayed. No additional Z-Wave devices
may be added to this Favorite, however a new Favorite may be created and devices added to the new
Favorite.
