7000 Series Installation and Programming Guide | Digital Monitoring Products
18
Home/Away System Type
Present your card to the reader. If the system is armed, once the card is validated, all areas are disarmed and the
keypad displays
ALL SYSTEM OFF
. If the system is disarmed when you present your card, once the card is validated,
HOME SLEEP AWAY
displays. Manually select
HOME
,
SLEEP
,
AWAY
or after a short time-out, all areas automatically
arm in the
AWAY
mode.
Keypad Access Control
Area and All/Perimeter Door Strike
From the Status List, present your card to the reader. Once the system validates the card, the Door Strike relay
activates. Home/Away systems only activate the 7073/A and 7173 Door Strike relay when arming and disarming.
Entry delay starts.
The System disarms the area and activates the Door Strike Relay.
ABC SECURITY
ENTER CODE: –
Figure 12: Present Access Card
ABC SECURITY
MON 10:20 AM
While the keypad displays the
Status List, present your access card.
Typically, the relay activates for 5 seconds during which
time you can open the door. Once you open the door,
you have 40 seconds to exit and close the door before
the Zone 2 Bypass expires.
Figure 11: Present Access Card
PERIM ALL
The system arms or disarms the areas and
activates the door strike relay on the 7073 or
7073A keypad.
Figure 10: All Perimeter Arming and Disarming
Keypad Entry Delay
All Systems
Once the entry delay starts, the keypad sounds an entry tone and displays
ENTER CODE: -
. Present your card to the
reader. Once validated, the system disarms all areas accessible by you and activates the 7073/7073A/7173 Door Strike
relay. Area systems provide a delay to allow selected areas only to be disarmed. See Keypad Arming and Disarming.
