![background image](http://html1.mh-extra.com/html/seco-larm/sli-enforcer-sk-b111-pq/sli-enforcer-sk-b111-pq_additional-information_1230599001.webp)
™
Specifications
Sample Wiring Diagram
Operating voltage
9~25 VDC
Current
draw
Standby
50mA@12VDC, 28mA@24VDC
Active (max.)
58mA@12VDC, 33mA@24VDC
Outputs
Form C
2.0A@30VDC
Tamper alarm 100mA@30VDC (Solid state N.C.)
Egress input
N.O. Ground
Door sensor input
N.C. Ground
Proximity reader
EM 125kHz
Faceplate material
Stainless steel, ABS/PC plastic
Operating humidity
0-95%, non-condensing
Operating temperature
-4°~122° F (-20°~50° C)
Dimensions
2
3
/
4
"x4
1
/
2
"x1
1
/
4
" (70x114x31 mm)
Weight
3.75-oz (107g)
1x SK-B111-PQ ENFORCER Indoor
Bluetooth
®
Keypad / Proximity Reader
2x
Security screws
11x
Crimp connectors
1x
Diode
1x
Varistor
1x
Security screw bit
1x
11-Wire Wiring Harness
1x
Quick Installation/Setup Guide
1x
Additional Information
Indoor
Bluetooth
®
Single-Gang
Keypad / Proximity Reader
SK-B111-PQ
Additional Information
What's in
the Box
™
SL Access
–
+
or
†
+ Lock –
Red – power (+)
Black – power (–)
Yellow – N.C. fail-safe
White – COM
Blue – N.O. fail-secure
Green pair – to RTE button
Brown pair – to door sensor
IMPORTANT NOTES
*
To protect the relay, you must install the enclosed diode—with the cathode (striped end
)
toward the positive side—for DC powered locks and install the varistor (MOV,
) for AC powered
locks and for electromagnetic locks
unless your lock has a diode/varistor (MOV) built in
. Failure to use
these as directed will void the warranty.
†
Use the blue wire for fail-secure applications and the yellow wire for fail-safe applications. Use electrical
tape to insulate the end of any unused wire.
Orange pair – to N.C. tamper
Power
Supply
12/24 VDC
MOV
*
Diode
*
Cathode
Alarm
System