13
DYN2MS-02F-0116A17
2.3
JP3 Main I/O Details
Refer to Section 2.4 JP3 I/O Connection Circuit for example connection diagram.
Pin No.
Signal
Symbol
Type
9
OnPosition Output
ONPOS
Output
Description
Connection Circuit
- Transistor ON (Signal LOW) if servo Off Position.
- Transistor OFF (Signal HIGH) if servo On Position.
- Servo On Position if motor position error within value set by
OnPosRange
parameter.
- Max. Voltage: 30V
- Max. Current: 30mA
[ B ]
*See section 2.4
Pin No.
Signal
Symbol
Type
8
Servo Alarm
ALM
Output
Description
Connection Circuit
- Transistor ON (Signal LOW) if servo drive alarmed or faulted
- Servo drive triggers protective alarm relative to Current, Voltage, Tempera
-
ture, Over Power, Position Lost Follow
- Max. Voltage: 30V
- Max. Current: 30mA
[ B ]
*See section 2.4
Pin No.
Signal
Symbol
Type
7
Common
COM
Output
Description
Connection Circuit
- JP3 I/O Pin. 8, 9, 10, 11 Control Signal Common.
[ A ] [ B ]
*See section 2.4
