5
DYN2MS-02F-0116A17
A.1 Introduction
This manual documents all features and specifications for the DYN2 series AC Servo Drive Type A -
General Purpose Pulse/Analog. The servo drive features standard pulse train and analog command input
modes compatible with universal motion controllers, PLC’s or CNC controllers. Control modes include po
-
sition, speed or torque servo mode with standard signal connections and interfacing for seamless integra
-
tion into any system. A high resolution 16-bit (65,536pulse/rev) encoder combined with outstanding 10ms
instantaneous position response optimizes performance in high-demand applications.
Gain adjustment is simplified with 3 parameter tuning for fast and easy adjustments while maintaining crit
-
ical
application and response flexibility. All testing and tuning is done through a RS232 or USB interface
with a host PC running DMMDRV GUI software for fast and easy set up. Drive status is internally moni
-
tored by 22 parameters for consistent and reliable performance.
Standard servo motor and encoder/motor power cable pair options available. Measuring only 32mm [W] x
85mm [H] x 75mm [D], the DYN2 AC Servo drive can power up to 0.75kW (7.1Nm) capacity. The perfect
servo drive for any small to medium capacity application.
A.2 Name Plate
A.3 Servo Drive Model Number
Model Number
Input / Output Specifications
Protection
Country of Origin
Lot / Serial Number
Hardware / Software Version
Note the name plate is region specific and may vary between each region model.
D Y N 2 - T L A 6 S - 0 0 0 0
DMM Servo Drive Series
DYN2 AC Servo Drive
Low Voltage DC Input
Voltage Class
T
60V
H
48V
S
24V
Motor Capacity
1
50W - 200W
L
400W - 750W
Command Type
A
Pulse / Analog
Encoder
4
14bit [16,384ppr]
6
16bit [65,536ppr]
Model Type
S
Standard
**
Custom
