Web Power Switch
Pro
5
Setup via LAN
If your network settings won’t access the default IP, use a direct cable
connection (temporarily bypass any switch or router) and follow these
steps to add a compatible static IP, such as 192.168.0.50 Before adding
an IP, close all programs and browsers. After the link is established, you
can enable DHCP.
If you prefer, you can also adjust network settings using the keypad and
LCD. See
Setup and Control via Keypad
on page 7.
Windows Step 1
In Windows, the first step is locating the network adapter TCP/IP
properties. The procedure differs for each Windows version:
Windows XP, 2000, 2003:
Open
Start / Control Panel / Network
Connections
. In “classic view”, select
Start / Settings / Control Panel /
Network Connections
. Right-click on
Local Area Network Connection
and select
Properties
. Proceed to step 2.
Windows Vista:
Open
Start
, right click on
Network
, then on
Properties
.
Double click
Network and Sharing Center
, click
Manage Newtork
Connections
. A Network Connections window appears. Right click on
the network connection to the switch, ie.
Local Area Network
. Proceed
to step 2.
Windows 7
: Open the
Start orb
, click on
Control Panel
. Click
View
Network Status and Tasks
, then
Change Adapter Settings
. Proceed
to step 2.
Windows 8-10:
Right-click on the Windows Start button. Select
Control
Panel
. Select
Network and Sharing Center or Network->Network
Settings
. Click
Change
Adapter Settings or Adapter Options
. Right
click on your connected network and select
Properties
. Proceed to step
2.
Windows Step 2
The second step is adding an IP such as 192.168.0.50
Temporarily disable DHCP while configuring the Pro
.
Select:
Internet Protocall TCP/IP V4 Properties
and click
Properties
.
