32
www.dkn-uk.com
www.dkn-uk.com
33
Belt Adjustment
The running belt may occasionally need adjustment. If so, place the treadmill on a level surface.
Turn the treadmill on at a speed of 6-8 km/h. Observe in which direction the running belt is
deviating. Before adjusting the belt make sure you turn the treadmill off, remove the safety key
and unplug the power cord.
If the belt has drifted to the right, unplug the safety
key and the power cord and turn the right adjusting
bolt a 1/4 turn clockwise. Then insert the power
cord and the safety key, turn the treadmill on and
set it to run at 8 km/h, watch to see where the belt
position moves to. Repeat above steps until the
running belt is positioned in the middle.
If the belt has drifted to the left, unplug the safety
key and the power cord, and turn the left adjusting
bolt a 1/4 turn clockwise, then insert the power
cord and the safety key, turn the treadmill on and
set it to run at 8 km/h, watch to see where the belt
position moves to. Repeat above steps until the
running belt is positioned in the middle.
The treadmill belt will gradually lose tension after
a period of time of use. If the belt starts to slip
then unplug the safety key and the power cord.
Turn the two adjusting bolts a 1/4 turn clockwise,
and insert the safety key and power cord. Then
start the treadmill and test to confirm if the belt no
longer slips. Repeat the above steps until the belt
is moderately tight and does not slip.
Incline Calibration
To calibrate the incline, press and hold and INCLINE- keys for 3 seconds. The
treadmill will now be in a calibration mode.
DO NOT OPERATE THE TREADMILL AND DO NOT STAND ON THE MACHINE DURING
THE CALIBRATION PROCESS.
While calibrating, the machine will move to its highest incline position and then return to 0% incline.
When the treadmill comes to a complete stop, the calibration process is finished.
Customer Support
Should you require any assistance regarding
this product, we are here to help. Please
gather the following information and then
contact us using the details on this page:
•
Serial No. - This can be found on a label
on the product itself
• Original purchase date
• Place of purchase
•
Information about the place and conditions
of use
•
Precise description of the issue or defect
In the case of an issue with the electrics, the
EnduRun provides error codes on the console.
Please note the code your machine displays
so we can help with diagnosing and resolving
the issue.
Important
Please retain your sales receipt as DKN
Customer Care may request proof of purchase
to validate eligibility for warranty service.
Warranty cover starts from the date shown
on the proof of purchase. Further warranty
information can be found on the next page.
The best way to contact us is via the website:
www.dkn-uk.com/contact-us
DKN UK
94 Cleveland Street
London
W1T 6NW
Email: [email protected]
