DK2 Power OPS232, User Manual

Page: 23 / 72

v.220513 | 23
STEP 7: LOG CATCHER
1. Rotate the Integrated Beam (01) Down from upright position and lock in place with the
release pin.
2. Install the Log Catcher Kit with M10 x 1.5 x 30mm Hex Bolts (84) , M10 Flat Washers (19) , M10
Lock Washers (85) , and M10 x 1.5 Locking Hex Nuts (24) in 2 places. Tighten the M10 x 1.5
Locking Hex Nuts (24) securely with a 17mm Socket Wrench (H) and tighten the M10 x 1.5 x
30mm Button Head Screws (88) using the 6mm Hex Key Wrench (E) .
ITEM # PART # DESCRIPTION SPECIFICATION QTY.
01 OPS23201Y22 Integrated Beam 1
19 OPS23219Y22 Flat Washer M10 4
24 OPS23224Y22 Locking Hex Nut G8.8, M10 x 1.5 4
84 OPS23284Y22 Hex Bolt M10 x 1.5 x 30mm 8
85 OPS23285Y22 Lock Washer M10 10
88 OPS23288Y22 Button Head Screw M10 x 1.5 x 30mm 2
STEP 8: FINAL INSTALLATION CHECK
Check tightness of all fittings, nuts and bolts prior to filling the log splitter with fluids.
24
85
19
01
84
LOG CATCHER KIT
ENGLISH