DK2 Power OPS232, User Manual

Page: 18 / 72

18 | OPS232(Y) man.
STEP 2: WHEELS
1. Remove disposable spindle covers and wheel bearing covers.
2. Slide Wheel Assembly (42) on to the spindle with valve stem of tire facing outwards.
3. Install 3/4” Flat Washer (53) on to the spindle.
4. Thread the slotted 3/4-16 Castle Nut (54) on to the spindle. The slotted nut should be
attached with a 28mm Socket Wrench (K) tight enough to eliminate the free-play of the
wheel assembly and not tighter. Make sure the wheels can freely rotate. The 3/4-16 Castle
Nut (54) needs to be oriented to allow for the installation of the 1/8” x 1-1/2” Cotter Pin (55) .
5. Install the 1/8” - 1-1/2” Cotter Pin (55) through the 3/4-16 Castle Nut (54) and spindle. Bend
pin ends around the spindle to secure its position.
6. Install the Hub Cap (56) using the Hub Cap Tool (57) . Gently tap on the hub cap tool with a
hammer to drive the hub cap into place.
7. Repeat these steps to install the second wheel.
ITEM # PART # DESCRIPTION SPECIFICATION QTY.
42 OPS23242Y22 Wheel Assembly 4.80 x 8 2
53 OPS23253Y22 Flat Washer 3/4" 2
54 OPS23254Y22 Castle Nut 3/4-16, Clear Zinc 2
55 OPS23255Y22 Cotter Pin 1/8" x 1-1/2" 2
56 OPS23256Y22 Hub Cap 4.80 x 8 2
57 OPS23257Y22 Hub Cap Tool 1
42
53
54
55
56
57
TANK ASSEMBLY
ENGLISH