DK Digital AVR-500, Owner'S Manual, Page: 6 / 28

Overview of the control elements
1. POWER - power switch
2. STEREO - mono / Stereo changeover switch in radio operation
3. STATION - for calling the radio station memories
4. APS - for automatically saving the radio stations
5. IR - Infrared sensor, receives the remote control signals
6. VOLUME - Volume control
7. Display - Display range for operational information
8. PHONES - Phones output
9. Indicator for standby
10. TAPE - for activating the TAPE input
11. RESET - for resetting the device into the delivery state
12. AUX - for activating the AUX input
13. TUNER/BAND - for activating the radio tuner or switching the
frequency band
14. VIDEO 1 - for activating the VIDEO 1 input
15. VIDEO 2 - for activating the VIDEO 2 input
16. DVD - for activating the DVD input
17. DTS / DOLBY - if you reproduce a 5.1-source in stereo, press this
DIGITAL key in order to reproduce the signal as DTS/DOLBY
DIGITAL
18. 2CH - for activating stereo operation (only the front
speakers and the subwoofer are then active)
19. DIGITAL IN - for activating the digital input
20. SURROUND - for selecting the surround operation modes “Movie”
or “Music” MODE
21. SUB ON/OFF - for switching the subwoofer ON or OFF
6