background image

H-SW3000 USER MANUAL V1

 

  < 1 > 

1

 

BEFORE YOU BEGIN 

1.1

 

What Is Included 

H-SW3000 Machine

Diversion Hose

Length 3.3m, diameter 125mm) 

×

 2 

Power Cord

User Manual

Dual Nozzle Bracket

Jumper Hose

Rain-proof Shield (Optional)

1.2

 

Unpacking Instructions 

Carefully unpack the product immediately and check the container to make sure all the parts are in the package and are in good condition. 

If the box or the contents (the product and included accessories) appear damaged from shipping, or show signs of mishandling, notify the 
carrier or dealer/seller immediately. In addition, keep the box and contents for inspection. 

1.3

 

Symbols 

Symbol 

Meaning 

Caution 

Critical installation, configuration, or operation information. Not following these instructions may make 
the product not work, cause damage to the product, or cause harm to the operator. 

Important 

Important installation or configuration information. Failure to comply with this information may keep the 
product from working correctly. 

Information 

Useful information. 

1.4

 

Disclaimer 

The information and specifications contained in this User Manual are subject to change without notice.  DJPOWER assumes no responsibility 
or liability for any errors or omissions and reserves the right to revise or to create this manual at any time. 

Copyright 

©

 2018 DJPOWER. All rights reserved. 

1.5

 

Safety Notes 

Please read the following Safety Notes carefully before working with the product. The notes include important safety information about 
installation, usage, and maintenance. 

1.5.1

 

Personal Safety 

Always connect the product to a grounded circuit to avoid the risk of electrocution.

During heating up and operation, the housing will be scalding hot. Do not touch.

Condensation may form on the bottom of the product, creating damp or wet conditions under and around the machine. Use caution! 
Surfaces around the product may become slippery. 

The product is ver

y hot during operation and it remains hot for a long time after operation has stopped. Do not touch the product’s 

nozzle. 

Make sure that children, unauthorised people and animals do not obtain access to the machine.

Eye protection is always required when operate the machine closely.

Summary of Contents for H-SW3000

















Reviews: