H-SW3000 USER MANUAL V1
< 2 >
1.5.2
Mounting and Rigging
•
For safety reasons, we do not recommend mounting the product in any capacity. Operate the product while it is on the ground only.
•
The product is for indoor use only! To prevent risk of fire or shock, do not expose the product to rain or moisture.
•
CAUTION: When transferring product from extreme temperature environments, (e.g. cold truck to warm humid ballroom) condensation
may form on the internal electronics of the product. To avoid causing a failure, allow product to fully acclimate to the surrounding
environment before connecting it to power.
•
Do not mount the product on a flammable surface (linoleum, carpet, wood, paper, carton, plastic, etc.).
•
Do not use in a confined space. Always install the product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent
surfaces.
•
Be sure that no ventilation slots on the product’s housing are blocked.
1.5.3
Power and Wiring
•
Always make sure that the voltage of the outlet to which you are connecting the product is within the range stated on the decal or rear
panel of the product.
•
Make sure the power cord is not crimped or damaged.
•
Never connect this product to a dimmer pack or rheostat.
•
Never disconnect the product from power cord by pulling or tugging on the cord.
•
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via
breaker or by unplugging it
1.5.4
Operation
•
Do not operate this product if you see damage to the housing or cables. Have the damaged parts replaced by an authorized technician
at once.
•
Make sure there are no flammable materials close to this product while it is operating.
•
Do not cover or plug the output nozzle during operation.
•
Do not use the product as a space heater.
•
Never carry the product by the power cord or any moving part. Always use the handles.
•
Drain the tank before transporting the product.
•
The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate the product at higher temperatures
.
•
Always disconnect the product from the power source before cleaning.
•
This product contains no user-serviceable parts. Any reference to servicing in this User Manual will only apply to properly trained,
certified technicians. Do not open the housing or attempt any repairs which can lead to damage or malfunction.
•
In the event of a serious operating problem, stop using the product immediately.
•
Use only DJPOWER Consumable PRO-V/PRO-A/PRO-C
Keep this User Manual for future use. If you sell the product, be sure that the purchaser receives this document.
2
INTRODUCTION
2.1
Description
World's first monocoque frame aqua low fog machine H-SW3000, creates a continuous low-lying fog hugs the floor and dissipates without
rising. By using the Ultrasonic technology, needs for dry ice is eliminated. Main consumables are pure water, environment friendly, cost saving
and space saving. Enhanced material, lighter than similar models, portable and durable. User-friendly LCD display and operation, it is perfect
for large clubs, large stage productions, rental companies and production release conference.
